RedTagCanada 2PCs ADS1115 Compatible 16 Bits 4 Channel Analog | Shop The World
From USA
NewGeneric
RedTagCanada 2PCs ADS1115 Compatible 16 Bits 4 Channel Analog to Digital ADC PGA Converter with Programmable Gain Amplifier High Precision I2C IIC 2.0V to 5.5V for Arduino for Raspberry Pi
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•★ The ADS1115 is measured at high resolution and has an input multiplexer (MUX) that provides two programmble conparator differentials or four single-ended input; Four single-ended or ±256mV, allowing both large and small signals to be the differential input.
•★ Especially a good tool for the Raspberry Pi, there is no analog GPIO pin; Easy to use I2C ADC Converter, with Programmable Gain Amplifier.
•★ Continuous mode: Only 150μA is easy to implement, single mode: auto power off function, onboard reference and oscillator.
•★ High precision ADS1115 16 Bit 4 Channel Analog-to-Digital ADC Converter. ★ Code Resource: Please get the link from the product description below. Wide supply range: 2.0V to 5.5V bits of resolution, offered in an ultra-small and leadless technology.
•★ 【PRACTICAL&PROFESSIONAL】- For micro-controllers without an analog-to-digital converter or when you want a higher-precision ADC, the ADS1115 provides 16-bit precision at 860 samples/second over I2C.
•★ 【CONFIGURED CHIP】- The chip can be configured as 4 single-ended input channels, or two differential channels.
•★ 【EASY TO OPERATE】- The chip's fairly small so it comes on a breakout board with ferrites to keep the AVDD and AGND quiet. Interfacing is done via I2C. you can be up to 4 ADS1115's connect.