Waveshare RP2040-Plus with Header, Pico-Like MCU Board Based on Raspberry Pi RP2040 Chip, Dual-core Arm Processor, Onboard 4MB Flash, USB-C Connector, Recharge Header, and Higher Current DC-DC Chip

Overview Need more Flash for Raspberry Pi Pico? Dislike the outdated Micro USB connector? All there problems are solved by our RP2040-Plus now. What's different, it features onboard 4MB Flash, USB-C connector, recharge header, and higher current DC-DC chip. RP2040-Plus, a low-cost, high-performance Pico-like MCU board based on Raspberry Pi microcontroller RP2040, compatible with most of the Raspberry Pi Pico add-on modules. Key features include: 1. RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom 2. Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz 3. 264KB of SRAM, and 4MB of on-board Flash memory 4. USB-C connector, keeps it up to date, easier to use 5. Lithium battery recharge/discharge header, suitable for mobile devices 6. Onboard DC-DC chip TPS63000, high efficiency DC-DC buck-boost chip, 1.8A current switch 7. Castellated module allows soldering direct to carrier boards 8. USB 1.1 with device and host support 9. Low-power sleep and dormant modes 10. Drag-and-drop programming using mass storage over USB 11. 26 × multi-function GPIO pins 12. 2 × SPI, 2 × I2C, 2 × UART, 3 × 12-bit ADC, 16 × controllable PWM channels 13. Accurate clock and timer on-chip 14. Temperature sensor 15. Accelerated floating-point libraries on-chip 16. 8 × Programmable I/O (PIO) state machines for custom peripheral support Package Content RP2040-Plus with pre-soldered header x1 Note Development Resources and Technical Support are provided, please feel free to contact us if you have any problem!