tomahawk dms 3001 12v cordless drill machine screwdriver hom P | Shop The World
From India
NewTomahawk
Tomahawk DMS-3001 12V Cordless Drill Machine & Screwdriver for Home | 10mm Keyless Chuck | 600 RPM | 24 Nm, 18+1 Clutch | 1.5Ah Battery + Charger | LED Light
•⚡ 12V CORDLESS POWER - No cable to run, no extension board and no socket to find, so the same drill works on a terrace, in a half-built site with no supply yet, or in the back of a vehicle. Pick it up, press the trigger, work.
•💪 24 NM OF TORQUE - Torque is turning force - it is what drives a long screw fully home into hard wood or a wall plug instead of stopping halfway and stripping the head. This is the number that decides whether the tool finishes the job or you finish it by hand with a screwdriver.
•🎚️ 18+1 TORQUE SETTINGS - Turn the collar down for a small screw in a cabinet hinge and up for a coach screw in a rafter. The clutch slips before it over-drives, which is what stops you splitting the wood or snapping the screw head clean off.
•🔃 600 RPM - A single speed keeps the drive simple - there is no gear collar to set wrong and no gearbox to wear out, and the motor delivers its full rated torque at that one speed. Let the tool reach full speed before it touches the work and it will bite cleanly instead of skating across the surface. Speed on its own means little - it is speed held under load that decides whether the tool cuts or stalls.
•🔩 10MM (⅜”) KEYLESS CHUCK - Change a bit with one hand in a couple of seconds - no chuck key to lose, which is the single most common reason a drill sits unused in a toolbox. Tighten it firmly by hand; a bit that slips in the chuck will chew the shank and then never grip properly again.
•🕳️ DRILLS STEEL: 8-10MM WOOD: 16-20MM PLASTIC: 65MM (USING HOLE SAW) - The honest limit of what this machine will go through. Buying a drill that is under-specified for the material is how motors get burnt out in the first month. Staying inside this limit is what keeps the motor alive - pushing a tool past its rated capacity is how they get burnt out in the first month. Use the right bit for the material and let the tool do the work rather than leaning on it.
•🔌 1.5 AH X 1 BATTERY PACK - Amp-hours are simply how long it runs before charging. The pack slides off without tools, so a spare swaps in within seconds. It charges from any ordinary wall socket - no special supply needed. The same pack fits the other tools on this battery platform, so a spare you already own is not wasted.
•↩️ FORWARD AND REVERSE - Backs a seized or wrongly-placed screw straight out without damaging the head or the surface around it. Also how you free a bit that has bound up in wet timber.
•📦 IN THE BOX - Cordless Drill Machine, Charger, 1 x Battery, Manual. Nothing else to buy before you can start work. Check this list against what arrives - if anything is missing, tell us and we will send it. Keep the carton until you have run the tool once; it is what a warranty claim or a replacement part is shipped back in. Everything listed here is included as standard, not sold separately as an upgrade.
•🛡️ 6-MONTH WARRANTY WITH SERVICE IN INDIA - covered against manufacturing defects, with genuine spare parts and our own service team, Monday to Saturday. If something goes wrong there is a number to call and a person who answers. Support is handled in India rather than routed overseas, so a fault is diagnosed and a part despatched without waiting on a time zone. Register the purchase date when it arrives - it is the only thing needed to start a claim later.
