Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•DIGITAL DISPLAY: Supports two measurements and symbol display, up to four digits and unit display. The symbols displayed are connected to the probe number of the tester (1-3).A capacitor can be detected and measured with up to four digits and unit display. The value can range from 25 PF (8 MHz clock, 50 pFat 1 MHz clock) to 100 mF, and the resolution can reach 1 pF (at 8 MHz clock).
•EASY TO USE: With 128x64 Chinese LCD screen, the measurement results show clearly and intuitively, which is convenient to use.One-button operation, automatic power off, can measure the current amplification factor of bipolar transistor and the threshold voltage of emitter junction.Built-in self-check function and optional 50Hz check clock frequency accuracy and waiting for call.The test time is about two seconds. Only capacitance and inductance measurement will take a long time.
•: The ATmega328 microcontroller has stable performance and can be used for a long time. Automatic detection of PNP and NPN bipolar transistors, N, P channel MOSFET, JFET, diode, double diode, thyristor thyristor.The test time is about two seconds. Only capacitance and inductance measurement will take a long time. The software can set the number of measurements before the power automatically closes.
•APPLICATION: Transistors can be identified by high threshold voltage and high current amplification factor. Support measurement triode, field effect transistor, diode, resistor, capacitor, inductance, capacitor test function (capacitance test should be discharged first to avoid damage).
•PRODUCT PARAMETER: The resolution of measurement is 0.1 ohm, and the maximum measurement value is 50M ohm. It can measure the equivalent series () capacitance of capacitors 2UF value. Resolution is 0.01 ohms and display two-digit values.
