szsauto car radio wire harness xe51 antenna cable adapter conn | Shop The World
From USA
NewGODPEE
SZSAUTO Car Radio Wire Harness XE51 with Antenna Cable Adapter Connector
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•Antenna Adapter : Used to connect the factory antenna to the aftermarket radio,the DIN plug plugs directly into the aftermarket radio and the fakra connector connects to the factory antenna
•22 Pin Radio Wire Harness : Used to replacing the factory radio with an aftermarket radio.The wiring harness is standard color coded so there is no need to cut any wires, just connect or solder it to the aftermarket radio connector and plug the adapter on the other end directly into the factory plug
•Red Ignition Wire : If your original radio harness does not have an ignition wire,you will not be able to control the aftermarket stereo on/off from the original radio harness.Only when the red wire is connected to the ignition port can power be supplied to the stereo. Simply attach one end to the ACC wire of the harness that comes with aftermarket radio,and connect the other end to the ACC wiring position located behind vehicle's ignition switch
•Applicable Model :
•Package list : 1 x Car radio wiring harness,1 x Antenna cable adapter,1 x Ignition power wire,16 x Butt connectors
