?[Multifunctional Wall Scanner]: The stud finder has a variety of scanning modes, including 1/2 inch (13 cm) scanning mode, which can locate the center and edge of the wood; the scanner can find the most 13-38mm (0.51- 1.5in) deep wood center and edge; metal scanning can detect metal up to 2.4 inches (60 mm) deep; AC scanning can detect 2 inches (51 mm) deep live.
?[Function]: It can detect the center position of partitions, wooden boards and gypsum board walls, and can quickly find the metal, joists and AC wires behind the floor and ceiling of various walls (except cement and brick walls); no matter you Whether you are a professional, a homeowner or a DIY enthusiast, you can find many uses in this electronic stud scanner
?[Accurate Positioning]: When looking for the wood position, place the tool vertically upwards, downwards, and parallel to the studs. The stud finder with auto-calibration function is fixed. When you approach the target, an arrow will appear on the LCD screen. Indicate the location of the target, move in the direction of the arrow on the screen to accurately locate
?[Ease of use]: First, press ON/OFF to turn on the device, and then press the mode switch button to slowly slide the wall scanner on the surface of the object to be measured. The LCD screen will light up and there will be arrows to guide you to slide. When you locate to the center of the stud, the signal strength indicator will become full and the buzzer will sound. Work requires 2 * 9V 6F22 batteries
?[Digital LCD display]: Easy to read LCD display + audio instructions, you can easily find the required stud center and the precise position of the stud. The digital stud detector has an LCD display and an audible warning to detect accurate Location of the object. After finding the material, the LCD display will indicate the direction, and the intensity of the beep will indicate whether you are close to the target. This will save a lot of time
