RedTagCanada TP5000 Charging Management Power Supply Module Bo | Shop The World
From USA
NewGeneric
RedTagCanada TP5000 Charging Management Power Supply Module Board TP5000 1A 2A Compatible with 4.2V 8.4V Single and Double Lithium Batteries TP5000 for Arduino
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•Advantages:-switch Buck-mode more efficient than the linear charging circuit high fever is also much smaller.
•Charging current: 1A, in the constant-current full charge retention 1A. Does not require additional heat dissipation reduces the heat on the charging current.
•ReduceS the charging time. Optional ordinary lithium-ion lithium polymer battery, or a lithium iron phosphate battery, it is only necessary to a jumper you can change the settings.
•Parameters: input: 4.5-9V output voltage: 4.2V/3.6V plus or minus 1% (circuit board default lithium ion battery 4.2V)
•Output Current: default 1A efficiency after the test will be described in detail, if the buyer's own test efficiency, it is not recommended to test the battery terminal voltage.
•The voltage-to-current testing suggestion string with accuracy of the ammeter do not recommend direct read power digital.
•if the buyer's own test efficiency, it is not recommended to test the battery terminal voltage, please note that the skip RS sampling 0.1 ohm resistance test, test input power close to the circuit board, reduce the wiring length will efficiency test, Recommended input increase the capacitance test.
From USA
