Radiolink RC8X Transmitter&R8FG&R4FGM V2.2 Gyro Receiver, 5.8G | Shop The World
From USA
NewRadiolink
Radiolink RC8X Transmitter&R8FG&R4FGM V2.2 Gyro Receiver, and 5.8G FPV Camera Transmitter and FPV Receiver Set, 4.3" IPS Touch FPV Screen, for RC Crawler/Drifting/Cars/Boats
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•【One Screen, Dual Use】：Full-color, 4.3 inch big touch-screen interface make menus setting sroll handy,screen color custom by user. Screen also can be use as FPV display with 5.8G image transmission and 5.8G image camera.
•【3ms Latency Response】Servo speed can be selected from 14ms, 4ms, and 3ms. 14ms is suggested selected if connect with the analog servo while 4ms or 3ms is suggested selected if connect with the digital servo. (adapted to firmware V1.1.5 or above, and FHSS V2 protocol.) And make sure the R8FG and R4FGM are with the V2.1 tags.
•【Used as FPV function】Radiolink 5.8G image transmission receiver can be used for FPV screen of RC8X by binding with The 5.8G image transmission OSD camera.
•【Support External OSD Chip and Smartaudio】The FPV camera supports external OSD chip and Smartaudio, and you are able to adjust frequency by your transmitter rather than pressing the FPV camera’s button. It can be applied on racing drones, RC cars, RC boats, and so on.
•【Built-In Telemetry & Gyro Receiver】: Real-time information telemetry on radio screen, like the vehicle's battery voltage, RSSI, etc. Receiver R8FG and R4FGM built-in gyro can keep the vehicle in a straight line, the gyro sensitivity can be adjusted by the VR switch, which fits for drifting and on-road cars.
From USA
