product-image
product-image
product-image
product-image
    1
    2
    3
    4
    5
flagProduct From USA  
new | Juniper Networks EX-SFP-10GE-BX23 Compatible 10GBASE-BX10-U BiDi SFP+ 1270nm-TX/1330nm-RX 10km DOM Simplex LC SMF Transceiver Module
Brand : FS
new | Juniper Networks EX-SFP-10GE-BX23 Compatible 10GBASE-BX10-U BiDi SFP+ 1270nm-TX/1330nm-RX 10km DOM Simplex LC SMF Transceiver Module
Brand : FS
Product Specifications
AsinFS43556XXX
AsinRef43556
OriginUSA
Brand NameFS
CategoryOptical Transceivers
Sub Category10/25/40/100G Modules
Leaf Category10G SFP+
Juniper Networks Compatible SFP-10G-BXU
Vendor Name FS
Form Factor SFP+
Max Data Rate 11.3168Gbps
Wavelength 1270nm-TX/1330nm-RX
Max Cable Distance 10km
Connector Simplex LC
Media SMF
Transmitter Type DFB
Receiver Type PIN
TX Power -8.2~0.5dBm
Receiver Sensitivity < -14.4dBm
Powerbudget 6.2dB
Receiver Overload 0.5dBm
Typical Power Consumption ≤1W
Extinction Ratio >3.5dB
Commercial Temperature Range 0 to 70°C (32 to 158°F)
Protocols SFP+ MSA Compliant, CPRI, eCPRI
Product Details
Max. Power Consumption 1W
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Save half fiber by Using Only One Fiber for Transmit and Receive
Hot Pluggable SFP+ MSA Compliant
FS BOX - Support Real-time Configuration
Digital Optical Monitoring Capability for Strong Diagnostic Capabilities
Optical Interoperability with 10GBASE XFP Interfaces On the Same Link
Product Description
Juniper SFP-10G-BXU compatible SFP+ transceiver supports up to 10km link lengths over OS2 SMF via an LC simplex connector. Digital diagnostics can also be used through the I2C interface designated by SFF-8472 to allow access to real-time operating parameters. Each BIDI SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface cards (NICs) etc.Featuring low power consumption and high speed, this 10G BIDI SFP+ transceiver is ideal for enterprise wiring closets, service provider transport applications, Radio & Baseband Units, etc.
Product Description
Juniper SFP-10G-BXU compatible SFP+ transceiver supports up to 10km link lengths over OS2 SMF via an LC simplex connector. Digital diagnostics can also be used through the I2C interface designated by SFF-8472 to allow access to real-time operating parameters. Each BIDI SFP+ transceiver module is individually tested to be used on a series of Cisco switches, routers, servers, network interface cards (NICs) etc.Featuring low power consumption and high speed, this 10G BIDI SFP+ transceiver is ideal for enterprise wiring closets, service provider transport applications, Radio & Baseband Units, etc.