product-image
product-image
product-image
product-image
    1
    2
    3
    4
    5
flagProduct From USA  
new | Cisco CVR-QSFP28-SFP25G Compatible QSFP28 100G to SFP28 25G Adapter Converter Module with DDMI
Brand : FS
new | Cisco CVR-QSFP28-SFP25G Compatible QSFP28 100G to SFP28 25G Adapter Converter Module with DDMI
Brand : FS
Product Specifications
AsinFS178074XX
AsinRef178074
OriginUSA
Brand NameFS
CategoryOptical Transceivers
Sub Category10/25/40/100G Modules
Leaf CategoryConverter/Fibre Channel
Cisco CompatibleCVR-QSFP28-SFP25G
Vendor NameFS
Form FactorQSFP28
Max Data Rate25Gbps
ConnectorSFP28
Power Consumption≤1.5W Without Module
DDM/DOMSupported
Extended Temperature Range-20 to 85°C (-4 to 185°F)
ProtocolsQSFP28 MSA SFF-8665, SFP28 MSA SFF-8432
Warranty5 Years
Product Details
Max. Power Consumption 1.5W Without Module
Use SFP28 in QSFP28 Port of Your Device
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Works out of the Box, No Configuration Needed
Extended Temperature Range -20°C to 85°C
FS BOX - Support Real-time Configuration
Hot Pluggable QSFP28 MSA Form Factor
Product Description
The Cisco compatible QSFP28 to SFP28 adapter converter module provides 25G Ethernet connectivity for QSFP28 100G ports. This module is compliant with QSFP28 MSA SFF-8665 and SFP28 MSA SFF-8432. The built-in MCU enables I2C reading of SFP28 registers by reading QSA registers. The high-speed data channel of the SFP28 receptacle is connected to lane 1 of the QSFP28 connector. The other three channels on the QSFP28 connector are not connected.
Note: The FS P/N is changed from CVR-QSFP28-SFP28 to QSFP28-SFP28-CVR, but the product is the same. Only the FS P/N has been changed.
Product Description
The Cisco compatible QSFP28 to SFP28 adapter converter module provides 25G Ethernet connectivity for QSFP28 100G ports. This module is compliant with QSFP28 MSA SFF-8665 and SFP28 MSA SFF-8432. The built-in MCU enables I2C reading of SFP28 registers by reading QSA registers. The high-speed data channel of the SFP28 receptacle is connected to lane 1 of the QSFP28 connector. The other three channels on the QSFP28 connector are not connected.
Note: The FS P/N is changed from CVR-QSFP28-SFP28 to QSFP28-SFP28-CVR, but the product is the same. Only the FS P/N has been changed.