product-image
product-image
product-image
product-image
    1
    2
    3
    4
    5
flagProduct From USA  
new | 1m (3ft) FS for Mellanox Compatible 400G QSFP-DD to 4x100G QSFP56 Active Optical Breakout Cable
Brand : FS
new | 1m (3ft) FS for Mellanox Compatible 400G QSFP-DD to 4x100G QSFP56 Active Optical Breakout Cable
Brand : FS
Product Specifications
AsinFS150585XX
AsinRef150585
OriginUSA
Brand NameFS
CategoryOptical Transceivers
Sub Category200/400/800G Modules
Leaf Category200/400G DAC/AOC/AEC
Part NumberQDD-4Q56AO01
Vendor Name FS
Form Factor QSFP-DD to QSFP56
Max Data Rate 400Gbps
Cable Length 1m (3ft)
Cable Type OM3
Wavelength 850nm
Minimum Bend Radius 30mm
Transmitter Type VSCEL
Receiver Type PIN
Power Consumption 400G <10W<br/>100G<5W
Jacket Material LSZH
CDR (Clock and Data Recovery) TX & RX Built-in CDR
Modulation Format 8x 50G-PAM4
DDM/DOM Supported
Commercial Temperature Range 0 to 70°C (32 to 158°F)
Protocols IEEE 802.3cd, OIF-CEI-04.0, QSFP-DD MSA, QSFP-DD-CMIS-Rev4.0, SFF-8024, IEEE 802.3bs Annex120E
Host FECPre-FEC BER 2.4E-4
Application400G Ethernet
Warranty 5 Years
Product Details
Built-in Inphi Chip, COB Packaging
Low Power Consumption <5W (100G Per End), 10W (400G Per End)
Tested in Targeted Switches for Superior Performance, Quality, and Reliability
Increased Reliability-VCSEL, No MPO Connectors, Low BER
FS BOX V4.0 - Support Real-time Configuration
PAM4 Modulation, Supports 400G to 4x 100G Ethernet Interoperability
Thin and Light Weight Fiber with High Air Flow for Flexible Routing
Product Description
The 400G QSFP-DD to 4x 100G QSFP56 breakout active optical cables are designed for use in 400 Gigabit Ethernet links over OM3 multimode fibers, each operating at data rates of up to 53.125Gbps per channel by PAM4 modulation. This breakout cable is compliant with IEEE 802.3cd, OIF-CEI, QSFP-DD MSA, QSFP-DD-CMIS, IEEE 802.3bs Annex120E SFF-8024, SFF-8679, SFF-8682 standards. Thin and lightweight AOC cables simplify cable management, enabling an efficient system airflow, which is critical in high-density racks. It is used extensively in cloud and supercomputers due to its low cost, high-value proposition, and increased reliability.
Product Description
The 400G QSFP-DD to 4x 100G QSFP56 breakout active optical cables are designed for use in 400 Gigabit Ethernet links over OM3 multimode fibers, each operating at data rates of up to 53.125Gbps per channel by PAM4 modulation. This breakout cable is compliant with IEEE 802.3cd, OIF-CEI, QSFP-DD MSA, QSFP-DD-CMIS, IEEE 802.3bs Annex120E SFF-8024, SFF-8679, SFF-8682 standards. Thin and lightweight AOC cables simplify cable management, enabling an efficient system airflow, which is critical in high-density racks. It is used extensively in cloud and supercomputers due to its low cost, high-value proposition, and increased reliability.