product-image
product-image
product-image
product-image
    1
    2
    3
    4
    5
    6
flagProduct From USA  
new | waveshare RP2040-Matrix Mini Development Board RP2040 RGB LED Matrix Board Onboard 5×5 RGB LED Matrix Based on Raspberry Pi Microcontroller Chip RP2040, Supports C/C++, MicroPython, Arduino
Brand : waveshare
new | waveshare RP2040-Matrix Mini Development Board RP2040 RGB LED Matrix Board Onboard 5×5 RGB LED Matrix Based on Raspberry Pi Microcontroller Chip RP2040, Supports C/C++, MicroPython, Arduino
Brand : waveshare
Product Specifications
Conditionnew
AsinB0CBRC87GH
CategoryElectronics
SubcategorySingle Board Computers
LeafcategorySINGLE_BOARD_COMPUTER
MPNRP2040-Matrix Mini Board
Processor Count2
OriginUSA
Brandnamewaveshare
Weight1
Product Details
【RP2040 RGB LED Matrix Board】a Pico-like MCU board based on Raspberry Pi RP2040，Castellated Module, Suitable For SMD Applications
【Onboard 5×5 RGB LED Matrix】For Colorful Lighting Display
【Dual-Core Arm Processor】Dual-Core Arm Cortex M0+ Processor, Flexible Clock Running Up To 133 MHz
【Supports C/C++, MicroPython, Arduino】Comprehensive SDK, Dev Resources, Tutorials To Help You Easily Get Started
【20 × Multi-Function GPIO Pins】Configurable Pin Function, Allows Flexible Development And Integration
Product Ranking
#7011 in Single Board Computers (Computers & Accessories)
Product Description
Introduction
RP2040-Matrix is a Pico-like MCU board based on Raspberry Pi RP2040. This castellated module allows soldering directly to carrier boards,
adapting 20 × multi-function GPIO pins in this mini board. Onboard 5*5 RGB LEDs are for colorful lighting displays or simple images.

Features
RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom.
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz.
264KB of SRAM, and 2MB of onboard Flash memory.
Onboard 5 × 5 RGB LED matrix for colorful lighting display.
The castellated module allows soldering directly to carrier boards.
USB 1.1 with device and host support.
Low-power sleep and dormant modes.
Drag-and-drop programming using mass storage over USB.
20 × multi-function GPIO pins.
2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels.
Accurate clock and timer on-chip.
Temperature sensor.
Accelerated floating-point libraries on-chip.
8 × Programmable I/O (PIO) state machines for custom peripheral support.

Note
When the RGB LED matrix is fully on and the current is about 350MA, it is recommended to use a power adapter of 500MA or more.
Please do not touch the RGB LED beads when the RGB LED matrix is fully on.
It is not recommended to fully illuminate the RGB LED matrix for a long period of time, as it will cause the LEDs to accumulate heat and lead to high
temperature, which will lead to a decrease in the life of the lamp beads or burn them out.

What's On Board
USB Type-C connector
5×5 RGB LED Matrix
BOOT button,press it when resetting to enter download mode
RESET button
RT9013-33GB,500mA low dropout, low noise, ultra-fast LDO
W25Q16JVUXIQ,2MB NOR-Flash
RP2040,dual-core processor, up to 133MHz operating frequency

Package Content
RP2040-Matrix x1
Product Description
Introduction
RP2040-Matrix is a Pico-like MCU board based on Raspberry Pi RP2040. This castellated module allows soldering directly to carrier boards,
adapting 20 × multi-function GPIO pins in this mini board. Onboard 5*5 RGB LEDs are for colorful lighting displays or simple images.

Features
RP2040 microcontroller chip designed by Raspberry Pi in the United Kingdom.
Dual-core Arm Cortex M0+ processor, flexible clock running up to 133 MHz.
264KB of SRAM, and 2MB of onboard Flash memory.
Onboard 5 × 5 RGB LED matrix for colorful lighting display.
The castellated module allows soldering directly to carrier boards.
USB 1.1 with device and host support.
Low-power sleep and dormant modes.
Drag-and-drop programming using mass storage over USB.
20 × multi-function GPIO pins.
2 × SPI, 2 × I2C, 2 × UART, 4 × 12-bit ADC, 16 × controllable PWM channels.
Accurate clock and timer on-chip.
Temperature sensor.
Accelerated floating-point libraries on-chip.
8 × Programmable I/O (PIO) state machines for custom peripheral support.

Note
When the RGB LED matrix is fully on and the current is about 350MA, it is recommended to use a power adapter of 500MA or more.
Please do not touch the RGB LED beads when the RGB LED matrix is fully on.
It is not recommended to fully illuminate the RGB LED matrix for a long period of time, as it will cause the LEDs to accumulate heat and lead to high
temperature, which will lead to a decrease in the life of the lamp beads or burn them out.

What's On Board
USB Type-C connector
5×5 RGB LED Matrix
BOOT button,press it when resetting to enter download mode
RESET button
RT9013-33GB,500mA low dropout, low noise, ultra-fast LDO
W25Q16JVUXIQ,2MB NOR-Flash
RP2040,dual-core processor, up to 133MHz operating frequency

Package Content
RP2040-Matrix x1