Product From USA | Condition | new |
|---|---|
| Asin | B0C48YZZNR |
| Category | Electronics |
| Subcategory | Amplifiers |
| Leafcategory | ELECTRONIC_COMPONENT_AMPLIFIER |
| MPN | XY-P15W |
| Color | Black |
| Origin | USA |
| Brandname | UwayKey |
| Height | 0.55 |
| Length | 1.97 |
| Width | 1.3 |
| Weight | 1 |
Simply connect to make the old speakers have Bluetooth function!Put aside a series of cumbersome links, only need to connect to the mobile phone to play music.It's time to revive the old speakers that we have almost forgotten!
Model:XY-P15W
Input Voltage:DC 8V-24V
Power Output:20W（MAX）
Output Impedance ：4-8Ω
Stereo Bluetooth Audio:Yes
Bluetooth version ：Bluetooth 5.0
Protection Functions:
Reverse connection protection
Short circuit protection
Self-recovery overheat protection
Output power (@1KHz):
16W*2 @12V 4Ω
10W*2 @12V 8Ω
15W*2 @16V 8Ω
20W*2 @20V 8Ω
30W*2 @24V 8Ω (requires heat sink)
Adapter speaker (30W~150W):
4 ohms (8~12V power supply)
8 ohms (8~24V power supply)
16 ohms (8~24V power supply)
Precautions for use:
1. Use the power amplifier board as far as possible from the WIFI signal (router)
2. Recommended power supply voltage DC 8~24V, more than 26V, the chip will burn out.
3. The power supply does not exceed 12V when connected to a 4Ω speaker, and the power supply does not exceed 24V when connected to an 8 ohm speaker.
4. The supply current is recommended to be 2A or more.
5. Module working power exceeds 20W*2, need to add heat sink
6. The speaker cable should not be too long, and it should be suitable within 1 meter.
7. Pay attention to static electricity protection. Before touching the power amplifier board, you need to release the static electricity on your hand to avoid static electricity from penetrating the chip. The Bluetooth chip is sensitive to static electricity.
8. It is recommended to adapt the rated power of the speaker to 30W and above to avoid the burning of the speaker.
Package includes:
1 x Digital Power Amplifier Module
Simply connect to make the old speakers have Bluetooth function!Put aside a series of cumbersome links, only need to connect to the mobile phone to play music.It's time to revive the old speakers that we have almost forgotten!
Model:XY-P15W
Input Voltage:DC 8V-24V
Power Output:20W（MAX）
Output Impedance ：4-8Ω
Stereo Bluetooth Audio:Yes
Bluetooth version ：Bluetooth 5.0
Protection Functions:
Reverse connection protection
Short circuit protection
Self-recovery overheat protection
Output power (@1KHz):
16W*2 @12V 4Ω
10W*2 @12V 8Ω
15W*2 @16V 8Ω
20W*2 @20V 8Ω
30W*2 @24V 8Ω (requires heat sink)
Adapter speaker (30W~150W):
4 ohms (8~12V power supply)
8 ohms (8~24V power supply)
16 ohms (8~24V power supply)
Precautions for use:
1. Use the power amplifier board as far as possible from the WIFI signal (router)
2. Recommended power supply voltage DC 8~24V, more than 26V, the chip will burn out.
3. The power supply does not exceed 12V when connected to a 4Ω speaker, and the power supply does not exceed 24V when connected to an 8 ohm speaker.
4. The supply current is recommended to be 2A or more.
5. Module working power exceeds 20W*2, need to add heat sink
6. The speaker cable should not be too long, and it should be suitable within 1 meter.
7. Pay attention to static electricity protection. Before touching the power amplifier board, you need to release the static electricity on your hand to avoid static electricity from penetrating the chip. The Bluetooth chip is sensitive to static electricity.
8. It is recommended to adapt the rated power of the speaker to 30W and above to avoid the burning of the speaker.
Package includes:
1 x Digital Power Amplifier Module
