product-image
product-image
product-image
product-image
    1
    2
    3
    4
    5
flagProduct From USA  
new | HangTon NP-FZ100 Dummy Battery AC DC Power Adapter for Sony Alpha A7CR A7CII A7C A9II A6700 ZV-E1 A7RIV A1 A7RV A7SIII FX30 FX3 A7IV A7III A6600 A7RIII A7s A9 A9R A9S Camera
Brand : HangTon
new | HangTon NP-FZ100 Dummy Battery AC DC Power Adapter for Sony Alpha A7CR A7CII A7C A9II A6700 ZV-E1 A7RIV A1 A7RV A7SIII FX30 FX3 A7IV A7III A6600 A7RIII A7s A9 A9R A9S Camera
Brand : HangTon
Product Specifications
Conditionnew
AsinB08CK3GRH6
CategoryElectronics
SubcategoryAdapters
LeafcategoryCE
MPNNP-FZ100
Battery Typelithium
ColorBlack
OriginUSA
BrandnameHangTon
Height1
Length1
Width1
Weight1
Product Details
AC DC power supply adapter AC-PW20 and dummy battery, replacement for Sony NP-FZ100 battery
Power for Sony Alpha A7CR, A7C II, A7C, A9 II, A6700, ZV-E1, A7R IV, A1, A7R V, A7S III, FX30, FX3, A7 IV, A7 III, A6600, A7R III, A7s, A9, A9R, A9S cameras
Output DC 7.2V/8V 3A 24W. Input AC 100-240V 50-60Hz. Dummy battery must be connected to power supply first, then put into the camera, and close the camera battery door
Perfect for long time shooting. About 47" (120 CM), with detachable power cord of US/UK/EU 2-pole plug
It is with multi safety protection and secure to use. Higher energy efficiency, friendly to the earth
Product Ranking
#3073 in Camera Power Adapters
Product Description
Manual: 1. Plug the Type-C charging cable into the power bank/charger. 2. Install the dummy battery into the camera and close the battery door. (Note: this step must be the last, otherwise some cameras will not turn on). If the installation sequence is reversed and the camera does not turn on, just take the fake battery out of the camera compartment and reinstall it to turn it on. 3. The product is equipped with a power indicator, which displays green when it is powered on. When there is no power, the indicator light is off
Product Description
Manual: 1. Plug the Type-C charging cable into the power bank/charger. 2. Install the dummy battery into the camera and close the battery door. (Note: this step must be the last, otherwise some cameras will not turn on). If the installation sequence is reversed and the camera does not turn on, just take the fake battery out of the camera compartment and reinstall it to turn it on. 3. The product is equipped with a power indicator, which displays green when it is powered on. When there is no power, the indicator light is off