product-image
product-image
product-image
product-image
    1
    2
    3
    4
    5
    6
flagProduct From USA  
new | Dual Battery Isolator Kit 12V 140Amp Voltage Sensitive Relay Replacement For Trucks Vehicle ATV UTV Boat Camper 4WD Rzr RV Car Watercraft Marine VSR Double Battery Automatic Charger & Wiring Cable Kit
Brand : JDMSPEED
new | Dual Battery Isolator Kit 12V 140Amp Voltage Sensitive Relay Replacement For Trucks Vehicle ATV UTV Boat Camper 4WD Rzr RV Car Watercraft Marine VSR Double Battery Automatic Charger & Wiring Cable Kit
Brand : JDMSPEED
Product Specifications
Conditionnew
AsinB07S1FPPQC
CategoryAutomotive
SubcategoryBattery Chargers
LeafcategoryRELAY
MPNDual Battery Isolator Kit
Connector TypeScrew
OriginUSA
BrandnameJDMSPEED
Weight4
Product Details
Dual Battery Isolator Kit Suitable for a wide range of vehicles; Suitable for 12V 4WD Marine, Off-Road Vehicles, RV, Truck，Caravan & Camping Applications; 12V, 140A, 13.3V cut-in voltage, 12.8V Cut-out Voltage
140 Amp Voltage Sensitive Smart Relay Replacement For Battery Isolation. The 140 Amp Dual Battery Isolator is all you need to charge Two Battery Systems. Voltage Sensitive Relay (VSR) cuts in at 13.3 volts and cuts out at 12.8 volts to ensure your primary battery is always charged and ready to start your vehicle. It's like having two separate power sources for each battery while only having one alternator
Package Include All the Bits and Pieces Needed for a Complete Installation; Safe for Alternator Outputs up to 120 Amps
Features: Rating Voltage: 12V DC; Continuous Current: 140 Amp; Intermittent Current: 170 Amp; Cut-in Voltage: 13.3V; Cut-out Voltage: 12.8V; Delay Time: 5 Seconds; Operation Temperature Range: -30 to 105°C (-22°F to 221°F); Storage Temperature Range: -40 to 125°C
It features a voltage sensitive chip ensuring your primary battery is always ready for your vehicle to run. This dual battery isolator is also built to withstand extreme weather environments, vibration and is water resistant. Fully Automatic and can be installed anywhere with its 2.5" x 2.5" x 2" size; Easy to install
Product Ranking
#2622 in Battery Chargers
#1661429 in Automotive
Product Description
12V 140A isolator with Cut-In:13.3V, Cut-Out:12.8V
Easy 3 wire connection at the battery. No need to bypass existing alternator wiring.
The smart isolator has no voltage drop. Conventional diode isolators incur a minimum of 0.6 volt drop. Compact size - No large heat sink
Operation Temperature Range: -30 to 105°C (-22°F to 221°F)
A smart battery isolator is the ultra-simple and most technologically advanced method of automatic battery isolation. These units can be installed between batteries with a common ground to automatically control the charging process to the batteries but continue to provide isolation when a charging source is unavailable. The small size and rugged construction of these units allow for quick simple installation for even the most novice DIYer. The smart isolator is also “Dual Sensing” which senses the charge of both batteries. If either battery is receiving a charge, e.g. a battery charger is connected to the auxiliary battery; the relay will engage and charge both batteries. The advanced technology always ensures that the first battery is fully charged (13.4v) before the connection is made to the second battery. This prevents problems that may result from your charging source being too low in amps to charge all batteries at once. If placed in linear sequence between each battery the isolator units can provide proper charging for several batteries in multiple battery setups such as in larger boats that may have 2 or more house batteries.
How it works: The smart battery isolator allows two batteries to be charged at the same time. When the engine is started and the start battery reaches 13.4 volts, the relay engages, allowing two battery banks (start and accessory) to be charged simultaneously.
Replacement For RV, Marine, Automotive, Diesel applications
Product Description
12V 140A isolator with Cut-In:13.3V, Cut-Out:12.8V
Easy 3 wire connection at the battery. No need to bypass existing alternator wiring.
The smart isolator has no voltage drop. Conventional diode isolators incur a minimum of 0.6 volt drop. Compact size - No large heat sink
Operation Temperature Range: -30 to 105°C (-22°F to 221°F)
A smart battery isolator is the ultra-simple and most technologically advanced method of automatic battery isolation. These units can be installed between batteries with a common ground to automatically control the charging process to the batteries but continue to provide isolation when a charging source is unavailable. The small size and rugged construction of these units allow for quick simple installation for even the most novice DIYer. The smart isolator is also “Dual Sensing” which senses the charge of both batteries. If either battery is receiving a charge, e.g. a battery charger is connected to the auxiliary battery; the relay will engage and charge both batteries. The advanced technology always ensures that the first battery is fully charged (13.4v) before the connection is made to the second battery. This prevents problems that may result from your charging source being too low in amps to charge all batteries at once. If placed in linear sequence between each battery the isolator units can provide proper charging for several batteries in multiple battery setups such as in larger boats that may have 2 or more house batteries.
How it works: The smart battery isolator allows two batteries to be charged at the same time. When the engine is started and the start battery reaches 13.4 volts, the relay engages, allowing two battery banks (start and accessory) to be charged simultaneously.
Replacement For RV, Marine, Automotive, Diesel applications