product-image
product-image
product-image
product-image
    1
    2
    3
    4
    5
    6
flagProduct From USA  
new | Stemedu 5PCS Micro SD Card Reader Module Memory Storage Mini TF Card Adapter SPI Interface Breakout Board for Arduino for Raspberry Pi with 40P Jumper Cable
Brand : Stemedu
new | Stemedu 5PCS Micro SD Card Reader Module Memory Storage Mini TF Card Adapter SPI Interface Breakout Board for Arduino for Raspberry Pi with 40P Jumper Cable
Brand : Stemedu
Product Specifications
Conditionnew
AsinB07MTTLF75
CategoryElectronics
SubcategorySingle Board Computers
LeafcategoryPC Accessory
MPN8541641720
OriginUSA
BrandnameStemedu
Height1
Length1
Width1
Weight1
Product Details
🚩 Support Micro SD Card, Micro SDHC card (high-speed card). Micro SD card max is 2GB, micro SDHC card max is 32GB. Please make sure the card format is FAT32.
Interface level: 5V or 3.3V
🚩 Power supply is 4.5V~5.5V, onboard 3.3V regulator circuit.
🚩 Communication interface is standard SPI interface.
Product Ranking
#2829 in Single Board Computers (Computers & Accessories)
Product Description
Description:
Interface level: 5V
Power supply: 4.5V to 5.5V , voltage regulator circuit board
Currency: 0.2-200mA
Communication interface: SPI
Dimension :4.2cm X 2.4cm (1.65inchX0.94inch)
Micro SD deck: It is a self-elastic card holder for easy insertion and removal of cards.
Positioning hole:4 M2 screw positioning holes with a hole diameter of 2.2mm, which makes the module easy to install and position, and realize module combination;

A total of 6 pins (GND, VCC, MISO, MOSI, SCK, CS), GND is ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;

Pin Description:
CS (chip select)
SCK (serial clock)
MOSI (master out slave in)
VCC ( 5V)
GND (ground)

Package Included:
5 X Micro SD Card Module
1 X 40P Female to Male Jumper Cable
Product Description
Description:
Interface level: 5V
Power supply: 4.5V to 5.5V , voltage regulator circuit board
Currency: 0.2-200mA
Communication interface: SPI
Dimension :4.2cm X 2.4cm (1.65inchX0.94inch)
Micro SD deck: It is a self-elastic card holder for easy insertion and removal of cards.
Positioning hole:4 M2 screw positioning holes with a hole diameter of 2.2mm, which makes the module easy to install and position, and realize module combination;

A total of 6 pins (GND, VCC, MISO, MOSI, SCK, CS), GND is ground, VCC is the power supply, MISO, MOSI, SCK is the SPI bus, CS is the chip select signal pin;

Pin Description:
CS (chip select)
SCK (serial clock)
MOSI (master out slave in)
VCC ( 5V)
GND (ground)

Package Included:
5 X Micro SD Card Module
1 X 40P Female to Male Jumper Cable