product-image
product-image
product-image
product-image
    1
    2
    3
    4
    5
    6
flagProduct From USA  
new | 12V Ant - 208 Car Radio FM AM Antenna Signal Amplifier Booster for Marine Car Boat RV
Brand : Qianson
new | 12V Ant - 208 Car Radio FM AM Antenna Signal Amplifier Booster for Marine Car Boat RV
Brand : Qianson
Product Specifications
Conditionnew
AsinB07K7C3QWM
CategoryElectronics
SubcategoryRadio Antennas
LeafcategorySpeakers
Colorblack
OriginUSA
BrandnameQianson
Height0.39
Length3.15
Width5.9
Weight1
Product Details
UPGRADE MATERIAL: Thicken the tinplate full metal casing, effectively shield the influence of interference in the automobile console on the amplifier. Use thick aluminum foil copper core 3C-2V signal cable, better shielding interference
COAXIAL CABLE POWER SUPPLY: Powering the car radio amplifier via signal lines. Use pure copper reinforced antenna connector, not easily deformed, the Male and female heads are more closely integrated
SAFETY AND PROTECTION: With antenna short circuit protection, automatic power-off when the original car antenna is faulty, the original glass column fuse is replaced with a waterproof insert piece, not worry about poor contact, no electricity
WIDE RANGE OF APPLICATIONS: Amplifier cable could use with antenna and ground wire, simple wiring. Works for both AM and FM radio stations, support 12V and 24V cars, trucks are also applicable
SIMPLE INSTALLATION: When installing, connect the 12V power supply, install the amplifier between the radio and the antenna, without changing the original car antenna route, the installation is simple and convenient. For easy installation and fixing, each amplifier comes with a piece of 3M glue
Product Ranking
#1543 in Radio Antennas
Product Description
Installation reference: 1.First, test if the radio is in good condition. 2.After the test is completed, turn off the flame, turn off the power, and start to remove the decorative frame. 3.After the decorative frame is removed, it is easy to take out the host. 4.After the main unit is pulled out, the antenna connector can be seen. Before buying, please confirm whether the antenna connector is consistent with the amplifier. 5.String the amplifier between the antenna and the radio 6.Find the ACC line 7.Put one end of the white line on the fuse and fix it. 8.Screw the other copper wire that can be activated by the white wire into a strand, and smash it onto the contact of the connector, and cooperate with the key to switch the switch (Note: only one contact can be made at a time, carefully short-circuit with other contacts) 9.The key switch is turned on, the amplifiers light is on, the key is turned off, and the light is off. The description has correctly found the ACC. You can test the effect first. 10.The test radio effect has been significantly improved, and the collinear clip is used on the ACC, no need to peel. The position of the clamp is recommended to be far from the radio position. 11.Buckled the magnetic rings, the position of the magnetic ring is determined according to the actual situation.Specifications: Material: Electronic Components, Metal, Plastic Color: Black Package weight: 0.14LB Product size: 2.17 x 1.38 x 0.59 inches Package size: 6.89 x 3.94 x 0.79 inches Package Contents: 1 x Ant - 208 Car Radio Signal Amplifier, 1 x 3M Sticker, 2 x Magnetic rings.Customer Services: It would be a great pleasure to help you.If it dont work at all or cant work well, please fell free to contact with us before you write a comment. We shall provide you with a satisfactory reply.
Product Description
Installation reference: 1.First, test if the radio is in good condition. 2.After the test is completed, turn off the flame, turn off the power, and start to remove the decorative frame. 3.After the decorative frame is removed, it is easy to take out the host. 4.After the main unit is pulled out, the antenna connector can be seen. Before buying, please confirm whether the antenna connector is consistent with the amplifier. 5.String the amplifier between the antenna and the radio 6.Find the ACC line 7.Put one end of the white line on the fuse and fix it. 8.Screw the other copper wire that can be activated by the white wire into a strand, and smash it onto the contact of the connector, and cooperate with the key to switch the switch (Note: only one contact can be made at a time, carefully short-circuit with other contacts) 9.The key switch is turned on, the amplifiers light is on, the key is turned off, and the light is off. The description has correctly found the ACC. You can test the effect first. 10.The test radio effect has been significantly improved, and the collinear clip is used on the ACC, no need to peel. The position of the clamp is recommended to be far from the radio position. 11.Buckled the magnetic rings, the position of the magnetic ring is determined according to the actual situation.Specifications: Material: Electronic Components, Metal, Plastic Color: Black Package weight: 0.14LB Product size: 2.17 x 1.38 x 0.59 inches Package size: 6.89 x 3.94 x 0.79 inches Package Contents: 1 x Ant - 208 Car Radio Signal Amplifier, 1 x 3M Sticker, 2 x Magnetic rings.Customer Services: It would be a great pleasure to help you.If it dont work at all or cant work well, please fell free to contact with us before you write a comment. We shall provide you with a satisfactory reply.