product-image
product-image
product-image
product-image
    1
    2
    3
    4
    5
    6
flagProduct From USA  
new | 12V Battery Charging Controller Board Automatic Charging Stop Control Module
Brand : Walfront
new | 12V Battery Charging Controller Board Automatic Charging Stop Control Module
Brand : Walfront
Product Specifications
Conditionnew
AsinB075NLYJ8S
CategoryAutomotive
SubcategoryBattery Chargers
LeafcategoryPRECISION_MEASURING
MPNWalfronttzug73ok2r
OriginUSA
BrandnameWalfront
Height7.086614166
Length19.68503935
Width12.992125971
Weight1
Product Details
: Automatic switch controller module made of high quality meterial, strong and , can be used for long time
EASY TO USE: Battery controller board equipped with reverse connect function and automatic shut down function, for use
WORK PRINCIPLE: Disconnected to shutoff when battery charging voltage to 14.4 V. Connected and began to when battery voltage is 10.5 V
PRACTICAL: Battery charging controller module assembled with special voltage control IC and special automobile relay, professional and
PROLONG SERVICE LIFE: Low voltage cut off automatic switch recovery control board can help prolong the service life of your battery pack





Product Ranking
#3731 in Battery Chargers
#2933350 in Automotive
Product Description
Specifications:
Size of PCB: 50 x 32 x 18 mm
Default Value:
Low Voltage: 10.5 V  
Shutoff Voltage: 14.8 V (adjustable, might be different)
Wiring Method: Please wire according to instruction. Do not change wiring.

Instruction:
Connect any wire of 220 V with the COM port of relay, and connect charger with OFF port.
The charger must be full bridge rectified output.
The DC output voltage can be between 13.8 and 14.8 V.
Charging test for the first time: battery voltage should be about 10 V.
Function 1: Current cannot be larger than 10 A.
Function 2: The board has reverse connect function. There is no output if no battery is connected. No output if the polarity of battery is wrong.
Output short circuit automatically shut down: It is a practical . As long as the output short circuit, the charger will automatically shut down output, so the charger from burning.
Adjustment:
VR1 relay disconnected to shutoff when battery charging voltage to 14.4 V. (shutoff voltage setting: clockwise lower, counterclockwise higher)
VR2 relay connected and began to when battery voltage is 10.5 V(low voltage setting: clockwise lower, counterclockwise higher)

Package includes:
1 x Charging Control Board

Note:
1. Users need electric knowledge to use this item, please make sure you know how to use it before you buy. Thanks for your understanding.
2. Please allow 1-3 mm error due to manual measurement. Thanks for your understanding.
3. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.
Product Description
Specifications:
Size of PCB: 50 x 32 x 18 mm
Default Value:
Low Voltage: 10.5 V  
Shutoff Voltage: 14.8 V (adjustable, might be different)
Wiring Method: Please wire according to instruction. Do not change wiring.

Instruction:
Connect any wire of 220 V with the COM port of relay, and connect charger with OFF port.
The charger must be full bridge rectified output.
The DC output voltage can be between 13.8 and 14.8 V.
Charging test for the first time: battery voltage should be about 10 V.
Function 1: Current cannot be larger than 10 A.
Function 2: The board has reverse connect function. There is no output if no battery is connected. No output if the polarity of battery is wrong.
Output short circuit automatically shut down: It is a practical . As long as the output short circuit, the charger will automatically shut down output, so the charger from burning.
Adjustment:
VR1 relay disconnected to shutoff when battery charging voltage to 14.4 V. (shutoff voltage setting: clockwise lower, counterclockwise higher)
VR2 relay connected and began to when battery voltage is 10.5 V(low voltage setting: clockwise lower, counterclockwise higher)

Package includes:
1 x Charging Control Board

Note:
1. Users need electric knowledge to use this item, please make sure you know how to use it before you buy. Thanks for your understanding.
2. Please allow 1-3 mm error due to manual measurement. Thanks for your understanding.
3. Monitors are not calibrated same, item color displayed in photos may be showing slightly different from the real object. Please take the real one as standard.