Product From USA | Condition | new |
|---|---|
| Asin | B074K1234V |
| Category | Electronics |
| Subcategory | Shoe Mount Flashes |
| Leafcategory | Photography |
| MPN | MK320S |
| Color | black |
| Origin | USA |
| Brandname | Meike |
| Height | 8.07 |
| Length | 2.36 |
| Width | 4.33 |
| Weight | 3 |
| Warranty Description | 1 year |
TTL Mode
The flash automatically adjusts the flash value through the camera lens metering; Can be manually fine-tuned, 9 levels(±0.3/0.7/1/1.3/1.7/2/2.3/2.7/3)
Manual Mode
1. The flash brightness can be adjusted from 1/128 to 1/1 (±1/3 EV for each gear)
2. In order to prevent the flash head from overheating and shorten the service life, please do not use the maximum gear (1/1) to flash more than 20 times continuously
Stroboscopic Mode
1. This function is very useful when making flash multiple exposure effects and shooting ghost images of fast-moving subjects
2. This mode uses a slower shutter speed, so it is recommended to use a tripod to prevent camera/flash shake.
3. Be sure to use a new battery or battery in full electricity and allow the flash to have fully electricity back within two flash operations
S1/S2 Mode
S1: It will trigger the flash synchronously with the first flash of the main flash, and the effect is the same as using the flash trigger. Your master flash should be set to manual flash, you should not use a TTL flash system with pre-flash, and you should not use redeye reduction with multiple flashes
S2: This mode can ignore the pre-flash from other TTL flashes, so it can support the master flash that works in TTL mode. If S1 mode can’t synchronize with your built-in flash, you can try S2 mode
Over Heat Protection
when the temperature of the flash is too high, the flash will be lock and cannot fire. The display shows TP-HI, wait for about 2 minutes after the temperature drops to normal, you can resume use, in order to avoid affecting the shooting, please try to use the flash value of 1/4 and below to shoot
Rotation Aggle of Speedlite Base
Flash can rotate 60 - 90º horizontally and -7 - 90º vertically
TTL Mode
The flash automatically adjusts the flash value through the camera lens metering; Can be manually fine-tuned, 9 levels(±0.3/0.7/1/1.3/1.7/2/2.3/2.7/3)
Manual Mode
1. The flash brightness can be adjusted from 1/128 to 1/1 (±1/3 EV for each gear)
2. In order to prevent the flash head from overheating and shorten the service life, please do not use the maximum gear (1/1) to flash more than 20 times continuously
Stroboscopic Mode
1. This function is very useful when making flash multiple exposure effects and shooting ghost images of fast-moving subjects
2. This mode uses a slower shutter speed, so it is recommended to use a tripod to prevent camera/flash shake.
3. Be sure to use a new battery or battery in full electricity and allow the flash to have fully electricity back within two flash operations
S1/S2 Mode
S1: It will trigger the flash synchronously with the first flash of the main flash, and the effect is the same as using the flash trigger. Your master flash should be set to manual flash, you should not use a TTL flash system with pre-flash, and you should not use redeye reduction with multiple flashes
S2: This mode can ignore the pre-flash from other TTL flashes, so it can support the master flash that works in TTL mode. If S1 mode can’t synchronize with your built-in flash, you can try S2 mode
Over Heat Protection
when the temperature of the flash is too high, the flash will be lock and cannot fire. The display shows TP-HI, wait for about 2 minutes after the temperature drops to normal, you can resume use, in order to avoid affecting the shooting, please try to use the flash value of 1/4 and below to shoot
Rotation Aggle of Speedlite Base
Flash can rotate 60 - 90º horizontally and -7 - 90º vertically
