product-image
product-image
product-image
product-image
    1
    2
    3
    4
    5
    6
flagProduct From USA  
new | SunFounder LCD2004 Module with 3.3V Backlight Compatible with Arduino R3 Mega2560 Raspberry Pi Display of 20x4 White Characters on Blue Background
Brand : SunFounder
new | SunFounder LCD2004 Module with 3.3V Backlight Compatible with Arduino R3 Mega2560 Raspberry Pi Display of 20x4 White Characters on Blue Background
Brand : SunFounder
Product Specifications
Conditionnew
AsinB071W8SW9R
CategoryElectronics
SubcategorySingle Board Computers
LeafcategoryPersonal Computer
MPN2004LCD
ColorLCD2004 (1Pack)
CPU Manufacturersunfounder
CPU Model Number2004LCD
Graphics Card DescriptionDedicated
Graphics Card Interfaceintegrated
Graphics RAM Typeunknown
OriginUSA
BrandnameSunFounder
Height1.18
Length4.72
Width4.33
Weight1
Display TypeLCD
Resolution[EO] 83 x 40
Warranty Description1 Year Guarantee
Product Details
Display 20 characters including letter, number and symbol in 4 lines on a large screen
Working voltage: 5V; Contrast adjustable with a 50K potentiometer onside
Bright backlight, displaying characters clearly
Module dimensions: 97 x 59 x 12 mm; Viewing area size: 71 x 21 mm
Compatible with Arduino and other micro-controllers
What's Inside The Box ?
LCD2004 Module
Product Ranking
#4602 in Single Board Computers (Computers & Accessories)
Product Description
Introduction
LCD2004 display is a dot matrix module designed to display 20 characters including letter, number, and symbol, supporting 4-bit and 8-bit data transmission mode. It’s quite convenient for beginners to call the built-in library Liquid Crystal compatible with Arduino IDE, no need to edit yourself.
Working voltage: 5V; Contrast adjustable with a 50K potentiometer onside. To use the 3.3V backlight, just connect pin A to 3.3V, pin K to GND.
Note: Solder the pin headers on it before using.
Pins’ Function
VSS: Connected to ground
VDD: Connected to a +5V power supply
VO: To adjust the contrast
RS: A register select pin that controls where in the LCD’s memory you are writing data to. You can select either the data register, which holds what goes on the screen, or an instruction register, which is where the LCD’s controller looks for instructions on what to do next.
R/W: A Read/Write pin to select between reading and writing mode
E: An enabling pin that, when low-level energy is supplied, causes the LDC module to execute relevant instructions.
D0-D7: To read and write data
A and K: Pins that control the LCD backlight
For more details, please click: http://wiki.sunfounder.cc/index.php?title=LCD2004_Module

Package Included
1 x LCD2004(The Pin Not Included)
Product Description
Introduction
LCD2004 display is a dot matrix module designed to display 20 characters including letter, number, and symbol, supporting 4-bit and 8-bit data transmission mode. It’s quite convenient for beginners to call the built-in library Liquid Crystal compatible with Arduino IDE, no need to edit yourself.
Working voltage: 5V; Contrast adjustable with a 50K potentiometer onside. To use the 3.3V backlight, just connect pin A to 3.3V, pin K to GND.
Note: Solder the pin headers on it before using.
Pins’ Function
VSS: Connected to ground
VDD: Connected to a +5V power supply
VO: To adjust the contrast
RS: A register select pin that controls where in the LCD’s memory you are writing data to. You can select either the data register, which holds what goes on the screen, or an instruction register, which is where the LCD’s controller looks for instructions on what to do next.
R/W: A Read/Write pin to select between reading and writing mode
E: An enabling pin that, when low-level energy is supplied, causes the LDC module to execute relevant instructions.
D0-D7: To read and write data
A and K: Pins that control the LCD backlight
For more details, please click: http://wiki.sunfounder.cc/index.php?title=LCD2004_Module

Package Included
1 x LCD2004(The Pin Not Included)