product-image
product-image
product-image
product-image
    1
    2
    3
    4
    5
    6
flagProduct From USA  
new | Digital FM Receiver Module, Icstation Radio Receiver Module Digital Stereo Board LCD Display DSP PLL 76.0MHz-108.0MHz Green
Brand : IS
new | Digital FM Receiver Module, Icstation Radio Receiver Module Digital Stereo Board LCD Display DSP PLL 76.0MHz-108.0MHz Green
Brand : IS
Product Specifications
Conditionnew
AsinB01N4AHISZ
CategoryElectronics
SubcategoryReceivers
LeafcategorySpeakers
MPN1054501
ColorGreen
OriginUSA
BrandnameIS
Height1.18
Length2.95
Width1.77
Weight1
Display TypeLCD
Product Details
Mini stereo FM receiver module adopts advanced DSP and PLL technology ensure high quality broadcast receiving performance
Blue backlight LCD display and potentiometer regulate the volume and frequency easy to operation
On-board 2X3W stereo audio amplifier chip enable you to DIY FM radio easily, no extra audio amplifier circuit needed
Working Voltage: DC 3-5V, Frequency Range: 50Hz-18KHz, Output Power: 500mW, Board Size: 75 X 45 X 30mm/2.95 X 1.77 X 1.18inch
What's Inside The Box ?
Power Cord, Power Adapter, User Manual
Product Ranking
#340 in Audio Component Amplifiers
#75586 in Electronics
Product Description
ICStation mini stereo FM receiver module adopting advanced DSP and PLL technology ensure high quality boadcast signal receiving performance. On-board 2X3W audio amplifier chip and support 30 class volume adjusting with blue backlight LCD display and potentiometer control easy to operation ideal for DIY FM wirless audio or short range voice communication system.

Instructions:
1. Mute/Unmute: short press the VOL potentiometer to turn on/off the mute.
2. Auto-squelch: Long press the FRE potentiometer to turn on/off the auto-squelch and the LCD will display the corresponding on/off.
3. Campus Broadcast On/Off: under power off status, long press the VOL potentiometer and power on the modulem the LCD display C1 means open the campus broadcast and display C0 means close the campus broadcast.
4. Under power off status, long press the FRE potentiometer and power on the module, LCD display BI means the backight keep light up; display B0 means only light up 20 seconds (default B0)

Notice Please:
the antenna can use the wire or the standard telescopic antenna.
Radio is a radio-sensitive device. Any interference from the power supply or nearby may affect the normal operation of the module. Therefore, it is recommended to supply a stable voltage to the module by using a battery or a power frequency transformer. Do not use switching power supply (such as mobile phone charger, and any other switching power supply), power bank, switching DC-DC converter. There should not have any working D-class power amplifier, microwave oven and other equipment that will generate high-frequency electromagnetic interference.
Product Description
ICStation mini stereo FM receiver module adopting advanced DSP and PLL technology ensure high quality boadcast signal receiving performance. On-board 2X3W audio amplifier chip and support 30 class volume adjusting with blue backlight LCD display and potentiometer control easy to operation ideal for DIY FM wirless audio or short range voice communication system.

Instructions:
1. Mute/Unmute: short press the VOL potentiometer to turn on/off the mute.
2. Auto-squelch: Long press the FRE potentiometer to turn on/off the auto-squelch and the LCD will display the corresponding on/off.
3. Campus Broadcast On/Off: under power off status, long press the VOL potentiometer and power on the modulem the LCD display C1 means open the campus broadcast and display C0 means close the campus broadcast.
4. Under power off status, long press the FRE potentiometer and power on the module, LCD display BI means the backight keep light up; display B0 means only light up 20 seconds (default B0)

Notice Please:
the antenna can use the wire or the standard telescopic antenna.
Radio is a radio-sensitive device. Any interference from the power supply or nearby may affect the normal operation of the module. Therefore, it is recommended to supply a stable voltage to the module by using a battery or a power frequency transformer. Do not use switching power supply (such as mobile phone charger, and any other switching power supply), power bank, switching DC-DC converter. There should not have any working D-class power amplifier, microwave oven and other equipment that will generate high-frequency electromagnetic interference.