product-image
product-image
product-image
product-image
    1
    2
flagProduct From USA  
new | BC2403 + XLR 3 Pin Male Connector: VMAX BC2403 24V 3 Amp 4-Stage Smart Battery Charger and Maintainer
Brand : VMAXTANKS
new | BC2403 + XLR 3 Pin Male Connector: VMAX BC2403 24V 3 Amp 4-Stage Smart Battery Charger and Maintainer
Brand : VMAXTANKS
Product Specifications
Conditionnew
AsinB00PNWR8Z0
CategoryAutomotive
SubcategoryBattery Chargers
LeafcategoryBATTERY_CHARGER
MPNVBC2403XM
OriginUSA
BrandnameVMAXTANKS
Weight3
Product Details
24 Volt 3 Amp Charger for 24V AGM, Gel, SLA, and FLA batteries
LED indicator lights show charging status and battery level
Auto-detect feature recognizes battery type and status, won't overcharge your battery
Easy to use, plug it in and forget it! Charges, maintains, and retores your battery.
Includes XLR 3 pin male connector, please see our store for other types of connector cables
Product Ranking
#3851 in Battery Chargers
#3133764 in Automotive
Product Description
Wheelchair/scooter/mobility/backup charger maintainer. Specifications: Input Voltage: 110VAC Input Current: 1.6A Nominal Voltage: 24V Bulk Charge Voltage: 29.4V Bulk Charge Current: 3A Connector: Insulated XLR 3 Pin Male Connector Battery Type: SLA, GEL, AGM Battery Capacity: 9-60Ah Enclosure: IP54 Size: 6.7 L x 2.8" W x 2" H Weight: 14.5 oz. Easy to use: 1. Connect the AC cord to AC outlet. The “power” LED will light on solid. 2. Connect positive charger clip (red) to positive battery terminal, the black clip to negative. The “25%~100%” LEDs will light in a sequence. If the batteries polarity is reversed or output is shorted, all LEDs will flash simultaneously, DISCONNECT & CHECK. 3. Depending on the charged capacity, 25%~100% LEDs will light up solid. When all are ON, the battery is fully charged. You can disconnect the battery to use OR keep it connected to charge in float mode. If battery stays at Stage 2 after 24 hours of charging, then the battery is defective.
Product Description
Wheelchair/scooter/mobility/backup charger maintainer. Specifications: Input Voltage: 110VAC Input Current: 1.6A Nominal Voltage: 24V Bulk Charge Voltage: 29.4V Bulk Charge Current: 3A Connector: Insulated XLR 3 Pin Male Connector Battery Type: SLA, GEL, AGM Battery Capacity: 9-60Ah Enclosure: IP54 Size: 6.7 L x 2.8" W x 2" H Weight: 14.5 oz. Easy to use: 1. Connect the AC cord to AC outlet. The “power” LED will light on solid. 2. Connect positive charger clip (red) to positive battery terminal, the black clip to negative. The “25%~100%” LEDs will light in a sequence. If the batteries polarity is reversed or output is shorted, all LEDs will flash simultaneously, DISCONNECT & CHECK. 3. Depending on the charged capacity, 25%~100% LEDs will light up solid. When all are ON, the battery is fully charged. You can disconnect the battery to use OR keep it connected to charge in float mode. If battery stays at Stage 2 after 24 hours of charging, then the battery is defective.