product-image
product-image
    1
flagProduct From USA  
new | Juniper MX960 High-Capacity DC Power Supply PWR-MX960-4100-DC-S
Brand : Juniper Networks
new | Juniper MX960 High-Capacity DC Power Supply PWR-MX960-4100-DC-S
Brand : Juniper Networks
Product Specifications
Conditionnew
AsinB0093G0NDG
CategoryElectronics
SubcategoryNetwork Adapters
LeafcategoryBISS
MPNPWR-MX960-4100-DC-S
OriginUSA
BrandnameJuniper Networks
Height1
Length1
Width1
Weight18
Product Details
Maximum Output Power: Two-Feed Mode: 4100 W. One-Feed Mode: 1700 W.
DC Input Voltage: Nominal: –48 VDC. Operating range: –40 to –72 VDC.
DC nominal input current rating @48 VDC: Two-Feed Mode: 104 A for both feeds (54 A and 50 A per feed). One-Feed Mode: 42 A.
Output Power (Maximum) per Supply: Two-feed mode: 4100W. One-feed mode: 1700W.
For use with MX960 Router (Sold Separately).
Product Description
Juniper Networks MX960 High-Capacity DC Power Supply, Model Number PWR-MX960-4100-DC-S, is to be used with Juniper MX960 Router. In the DC power configuration, the router contains either two or four DC power supplies (see Figure 1), located at the lower rear of the chassis in slots PEM0 through PEM3 (left to right). You can upgrade your DC power system from two to four power supplies. The DC power supplies in slots PEM0 and PEM2 provide power to the lower fan tray, DPC slots 6 through 11, and SCB slots 1 and 2. The DC power supplies in slots PEM1 and PEM3 provide power to the upper fan tray, DPC slots 0 through 5, and SCB slot 0. Four power supplies provide full redundancy. If a DC power supply fails, its redundant power supply takes over without interruption. For existing power supplies, each DC power supply has a single DC input (–48 VDC and return). For high-capacity power supplies, each DC power supply has two DC inputs (–48 VDC and return). The minimum number of power supplies must be present in the router at all times.
Product Description
Juniper Networks MX960 High-Capacity DC Power Supply, Model Number PWR-MX960-4100-DC-S, is to be used with Juniper MX960 Router. In the DC power configuration, the router contains either two or four DC power supplies (see Figure 1), located at the lower rear of the chassis in slots PEM0 through PEM3 (left to right). You can upgrade your DC power system from two to four power supplies. The DC power supplies in slots PEM0 and PEM2 provide power to the lower fan tray, DPC slots 6 through 11, and SCB slots 1 and 2. The DC power supplies in slots PEM1 and PEM3 provide power to the upper fan tray, DPC slots 0 through 5, and SCB slot 0. Four power supplies provide full redundancy. If a DC power supply fails, its redundant power supply takes over without interruption. For existing power supplies, each DC power supply has a single DC input (–48 VDC and return). For high-capacity power supplies, each DC power supply has two DC inputs (–48 VDC and return). The minimum number of power supplies must be present in the router at all times.