product-image
product-image
product-image
product-image
    1
    2
    3
    4
flagProduct From USA  
new | DKG-117 72x72mm Generator Control Panel with Synchroscope and Check Synch Relay/Controller
SKU : 04605BAUXXB00820OHOA
Brand : Datakom
new | DKG-117 72x72mm Generator Control Panel with Synchroscope and Check Synch Relay/Controller
SKU : 04605BAUXXB00820OHOA
Brand : Datakom
Product Specifications
Conditionnew
AsinB00820OHOA
CategoryTools & Home Improvement
SubcategoryMulti Testers
LeafcategoryBISS Basic
MPN00-00000025
OriginUSA
BrandnameDatakom
Height1
Length1
Width1
Weight5
Product Details
WE DO NOT SELL THIS PRODUCT FOR USAGE IN USA AND CANADA
Product Ranking
#4073 in Multi Testers
#1913938 in Tools & Home Improvement
Product Description
WE DO NOT SHIP THIS PRODUCT TO USA AND CANADA

The DKG-117 is a microprocessor controlled synchroscope with programmable synch check relay IN A DIN72 front panel mounted package. It monitors the voltage and frequency of 2 independent power networks as well as the instantenous phase angle between them. The measured parameters are displayed on the 3 digit digital display. The 24 led circular synchroscope displays the phase angle between 2 networks. The synchroscope display is only activated if both network voltages are within the set limits.
The DKG-117 is mainly used in manual genset synchronization applications for synchronization checking between a genset and the genset busbar or between the genset busbar and the mains. The synchronization checking is enabled either via the SYNCH CHECK ENABLE signal input or by depressing the front panel SYNCH pushbutton.
The synchronization checking consists of the verification of below conditions during 4 consecutive busbar cycles:
-the busbar voltage between set limits
-genset phase voltage between set limits - busbar-genset frequency difference below the set limit
-busbar-genset voltage difference below the set limit
-busbar-genset phase angle below the set limit
If all above conditions are satisfied for 4 consecutive busbar cycles then the CHECK SYNCH relay will be immediately energized. If the busbar is not powered up, the synch checking may be overridden with the DEAD BUS ENABLE signal input. The SYNCH CHECK relay is deactivated either by removing the SYNCH CHECK ENABLE signal or by depressing the front panel SYNCH pushbutton.
The DKG-117 provides a comprehensive set of digitally adjustable threshold levels and timers. All programs are modified via front panel pushbuttons, and do not require an external unit. The MENU pushbutton allows the digital display to navigate between various measured parameters.

Product Description
WE DO NOT SHIP THIS PRODUCT TO USA AND CANADA

The DKG-117 is a microprocessor controlled synchroscope with programmable synch check relay IN A DIN72 front panel mounted package. It monitors the voltage and frequency of 2 independent power networks as well as the instantenous phase angle between them. The measured parameters are displayed on the 3 digit digital display. The 24 led circular synchroscope displays the phase angle between 2 networks. The synchroscope display is only activated if both network voltages are within the set limits.
The DKG-117 is mainly used in manual genset synchronization applications for synchronization checking between a genset and the genset busbar or between the genset busbar and the mains. The synchronization checking is enabled either via the SYNCH CHECK ENABLE signal input or by depressing the front panel SYNCH pushbutton.
The synchronization checking consists of the verification of below conditions during 4 consecutive busbar cycles:
-the busbar voltage between set limits
-genset phase voltage between set limits - busbar-genset frequency difference below the set limit
-busbar-genset voltage difference below the set limit
-busbar-genset phase angle below the set limit
If all above conditions are satisfied for 4 consecutive busbar cycles then the CHECK SYNCH relay will be immediately energized. If the busbar is not powered up, the synch checking may be overridden with the DEAD BUS ENABLE signal input. The SYNCH CHECK relay is deactivated either by removing the SYNCH CHECK ENABLE signal or by depressing the front panel SYNCH pushbutton.
The DKG-117 provides a comprehensive set of digitally adjustable threshold levels and timers. All programs are modified via front panel pushbuttons, and do not require an external unit. The MENU pushbutton allows the digital display to navigate between various measured parameters.

Loading...