NEXTION Enhanced 3.5 NX4832K035 Resistive Touch Screen HMI LCD | Shop The World
From USA
NewNEXTION
NEXTION Enhanced 3.5 NX4832K035 Resistive Touch Screen HMI LCD Display 480x320 for Arduino Raspberry Pi
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•Compare to the basic Nextion 3.5, Nextion enhanced 3.5 add new functions: support built-in RTC, save data to Flash, GPIO, larger flash capacity and faster CPU.
•There is bug in Nextion HMI file. If you power it with micro USB interface, nextion display may wrongly show T series. Please power it with CR1220 battery and connect 4 pin cable, then nextion screen will show K series correctly
•Its easy to adapt Nextion family HMI to existing projects, you just need to provide it a UART.
•This is nextion 3.5 case, only for enhanced not basic, https://www.amazon.com/dp/B079161H78
•You can buy most nextion display here, https://www.amazon.com/nextion
