meonum 18 set blow mold light kit replacement e27 e26 single P | Shop The World
From USA
NewMeonum
Meonum 18 Set Blow Mold Light Kit Replacement, E27 E26 Single Light Cord Kit with Switch Fuse Plug, for Indoor Outdoor Halloween Christmas Village House Craft Decorations and Salt Lamp
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•Blow Mold Light Kit Replacement: Our blow mold light kit replacement does not include the bulbs, you can choose to install your own LED bulbs or incandescent bulbs, the sockets are suitable for bulbs with a voltage of 250V 660W, perfect for your Halloween and Christmas blow lights to create a good festive atmosphere
•Accessory Cord with Switch: There is a rotary switch on the single light cord, you can control the blow molded light at will with this switch; The plug 125V 5A complies with US standards and is easy to plug in and pull out; And the plug has 2 built-in fuses to ensure your safety during use; Note: please keep away from water sources
•E27 Bulb Socket: E27 bulb socket with good heat dissipation, Not only for large outdoor blow molded lamps, but also for indoor salt lamp pumpkin lamps and Xmas craft replacement light, long time use will not melt, can be reused many times, it can also be used as a spare part to help relight your old vintage blow molds
•Wide Range of Applications: just 3 assembly steps, screw the bulb into the lamp holder, the holder snaps into the chassis then plug in, and it's ready to use; 5 feet of cord is enough for everyday use, suitable for bedroom hallway balconies as well as front door Halloween and Christmas blow mold light decorations, or use in indoor lamps or other craft installations. Tips: Use screws with a thread diameter of up to 3mm can be used for mounting on the wall or elsewhere
•Specifications Information: The accessory cord has a bulb socket size of 27mm, fits E27/26 bulbs and has a 5 feet cord with an on/off switch. The plug contains 2 pieces of fuse wire and a 3.5 inch base to help hold the bulb in place, suitable for a variety of Christmas village lights pumpkin lights salt lamps and blow molded lights
From USA
