liftmaster 78lm wired wall mounted garage door opener control | Shop The World
From USA
NewLiftMaster
LiftMaster 78LM Wired Wall-Mounted Garage Door Opener Control Panel
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•Compatibility: This product is Compatible ONLY with LiftMaster Security+ 2.0 Garage Door and Gate Openers
•Connectivity: This product works on wired connectivity for power source and does not support WiFi connectivity
•Wiring Instructions: Run bell wire up wall and across ceiling to motor unit. Use insulated staples to secure wire to wall and ceiling in several places. Do NOT pierce wire with a staple, this will create a short or open circuit. Strip 7/16" (11 mm) of insulation from the end of the bell wire. 6. Connect bell wire to terminals as follows: Quick Connect Terminals: Red/white wire to red terminal and white wire to white (Figure 1). Screw Terminals: Red/white to 1 and white to 2 (Figure 2)
•Light Feature: Press the Light button to switch the opener light on or off. The Light button will not control the opener light when the door is in motion. Adjustable Light Timer- Personalize your garage's illumination with a customizable timer, ensuring optimal lighting whenever required.
•Operation: Door Control Push Button: Press to open or close the door. Press again to reverse the door during the closing cycle, or to stop the door while it is opening. Lock Feature - To activate: Press and hold the Lock button for 2 seconds. The push button indicator light will flash as long as the lock is on. To turn off: Press and hold the Lock button again for 2 seconds. The Lock feature will also turn off whenever the Learn button on the opener end panel is activated.
