JIFETOR Engine Compression Test Pressure Gauge Set Engine Oil | Shop The World
From USA
NewJIFETOR
JIFETOR Engine Compression Test Pressure Gauge Set and Engine Oil Pressure Gauge Transmission Fluid Diagnostic Tester Tool Kit
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•CYLINDER COMPRESSION TEST AND DIAGNOSTIC: JIFETOR engine compression tester kit is used for measuring pressure on gasoline engine cylinder quickly and accurately. The gauge readings assist to diagnose if there are following problems: valve sticking, carbon build-up, cracked cylinder head or defective main gasket, poorly seated or worn piston rings, burned or damaged piston. Please refer to the vehicle manufacturer's service instructions or proprietary manual and our manual for details.
•WIDE USE OF ENGINE COMPRESSION TESTER: There are 16" long flexible extension hose with 4 sizes (10mm 12mm 14mm 18mm) selectable brass adapters in the cylinder tester set, widely suitable for most types and depth spark plug well on gasoline petrol gas fuel engine cylinder, which is common in motorcycle, car, truck, lawn mower, ATV and so on. Please note, the gauge is not used for most diesel engine, due to the low pressure range 0-300PSI.
•UNIVERSAL GASOLINE ENGINE CYLINDER TESTER CONNECTORS: The straight and angled push-on connectors are equipped with rubber tapered tip for easy and quick installation, you just need to push and hold it seal against cylinder head, rather than screw to tighten like 10mm 12mm 14mm 18mm appropriative adapters. These push-on connectors are also perfect for some types and depth spark well, which the appropriative adapters do not fit.
•ENGINE AND TRANSMISSION OIL PRESSURE TEST AND DIAGNOSTIC: JIFETOR engine and transmission oil pressure test kit is used for measuring oil pressure on lubrication system quickly and accurately. Remove low oil pressure switch, attach the tester with appropriate adapter, start engine to read the pressure on the gauge. Verify vehicle oil pressure is normal or not against manufacturer's recommended readings. Turn off the engine and remove the tester, replace the low oil pressure switch, then done.
•FITMENT TYPE: The oil pressure test tool includes 12PCS brass connectors, very sturdy and durability, fit for most vehicles with gasoline or diesel engine, includes car, motorcycle, ATV, truck and so on. Pressure gauge adopts rubber cover protected 3-1/2" large dial. 0-500psi and 0-35bar big scale range, is more suitable for testing big engine. No pressure holding function, return to zero automatically. The 40" long rubber nylon resin hose, is equipped with a 1/8" NPT brass adapter
From USA
