hictop 410 410 double sided pei magnetic build plate adhesiv P | Shop The World
From USA
NewHICTOP
HICTOP 410 * 410 Double Sided PEI Magnetic Build Plate with Adhesive for CR-10 S4,CR-6 Max,RepRap X400, Raptor, T-REX and 2+, T-Rex 3.0 and Raptor 2, Anycubi Chiron, Vorn Core XY 3D Printers
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•1 The HICTOP double sided pei is combined with 2 parts, a flexible steel platform coated with textured PEI surface on both sides and a magnetic bottom sheet with adhesive on the back
•2 The HICTOP textured PEI is very easy to use, simply stick the magnetic bottom sheet onto your heated bed, then place the steel platform with PEI surface on the top. The maximum temperature for printing is 130℃ on the bed
•3 Excellent adhesion can be achieved when the temperature of the heated bed is about 60℃, you can print directly on each side of the double sided PEI sheet without using any glue or other tools to help the model to stick onto the sheet. You do not need to worry about the prints curling with a 60℃ bed temperature.It also can print PETG very well, but the temperature of the hotbed needs to be about 80-85℃
•4 Prints come off 410*410 pei sheet easily when the temperature of the heated bed reaches room temperature. If the print is still stuck, gentle flexing of the plate will help remove it
•5 The size of HICTOP PEI bed is 410*410mm（16.1*16.1inch）, it is applicable with Creality 3D printer such as Creality CR-10 S4，CR-6 Max RepRap X400, Raptor, T-REX and 2+ , T-Rex 3.0 and Raptor 2, Anycubi Chiron, Vorn Core XY and other same size 3D Printers
From USA
