hf116f 2 120al 1h power relay 1 pack 120vac coil 30a 277vac Pr | Shop The World
From USA
NewKwaich
HF116F-2 120AL-1H Power Relay 1 Pack, 120VAC Coil, 30A 277VAC 25A 240VAC, 1 Form A SPST-NO, 4-Terminal QC/Screw Mount High Power Relay for Appliance Industrial Control
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•[MODEL / SPEC CHECK] HF116F-2 120AL-1H power relay, 1 pack; 120VAC coil, 30A 277VAC rating, 25A 240VAC rating, 1 Form A / SPST-NO contact layout, and 4-terminal case. Match the existing relay model, coil voltage, contact rating, terminal layout and mounting style before ordering.
•[LOAD RATING CHECK] Casing markings include 30A 277VAC, 1.5HP 120VAC, 3HP 240VAC, TV-10 120VAC, plus 25A 240VAC cosφ=1 / 0.4 and 27A 240VAC cosφ=0.8 references. Use only within your equipment’s rated circuit requirements
•[TERMINAL LAYOUT CHECK] The printed diagram shows a 1 Form A normally open circuit with terminals 2 and 3 for the switched contact and terminals 6 and 5 for the coil. Confirm terminal numbers, blade width, spacing and socket/wire positions before installation.
•[APPLICATION CHECK] Suitable as a matching-spec replacement relay for appliances, power control equipment, industrial control panels and other AC-load circuits that require HF116F-2 120AL-1H style, 120VAC coil and 1 Form A layout. Compatibility depends on the circuit design.
•[INSTALLATION NOTE] Disconnect power and verify the circuit is de-energized before service. Remove the old relay straight out, avoid bending terminals, and inspect the socket, wires or connector for heat damage, corrosion, moisture or loose terminals before installing.
•[IMPORTANT CHECK] Do not order by case size alone. If your relay marking, coil voltage, terminal count, contact form, ratings, or mounting holes are different, confirm with your equipment manual or control panel schematic before purchase.
From USA
