fysetc 3d printer cr10 s4 print bed 410x410 build plate Price | Shop The World
From USA
NewFYSETC
FYSETC 3D Printer CR10 S4 Print Bed - 410x410 Build Plate - Original Glass Plate Replacement Kit: Double Sided Textured PEI Sheet Power-Coated Spring Steel Only Fit AnycubiChiron
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•Crealty CR10 S4 Bed 410 x410x 2.7mm: Upgrade Spring Steel Sheet, Gold, Both sides can be used. Flexible, removable, can stick very well. High strength and heat resistance. Not included a soft sticker base. Adopt 0.5mm thickened steel plate, with a thick powder coating on both sides, total 0.7mm thickness, thicker, longer lifespan and better heat saving, greater bed adehsion. The sticker is 2.0mm, much thicker then other 1.2mm, stronger magentism. Therefore, this thicker platform, you deserve!
•410x410 PEI Sheet: Compatible with Crealty CR10 S4, RepRap X400, Raptor, T-REX and 2+ , T-Rex 3.0 and Raptor 2, Anycubi Chiron, Vorn Core XY or other same size hotbed/build plate. Not work with Anycubi Kobrra Max(429x410mm) !!!Please re-measure your build plate before ordering, Not rely on the build volume/printing size. If can accept the deviation 5-10mm against your heat bed, fit 420 3d printer bed, just buy it.
•More Stable Print Bed 410x410: Two-in-one type of PEI powder coated hardended steel spring sheet, not easy to get deformed, more durable than PET style . It behaves as most PEI sheets would and works great with PLA, TPU, PETG, ABS, as well as many other filaments. If you need more adhesion for tough-to-stick filaments like Nylon, feel free to use glue sticks, they will wash off with water after use.
•Flexible plate only, no magnet. Easy to install, The model can be easily removed by bending the plate when the bed temp cools down, without the need for additional adhesives, tapes, or slurry. It is possible to add inductive Z probes and add ABL printers for certain objects that need to be upgraded.
•Simple to maintain: Just wipe down with a cleaning detergent between prints for best results. If you ever need to restore adhesion, use very fine sandpaper 600 or higher and pass lightly, then clean with warm water.
From USA
