Electronics Project kit Raspberry Pi 4 (1GB/2GB/4GB), Pi 3 Pi | Shop The World
From USA
NewTR Computers
Electronics Project kit for Raspberry Pi 4 (1GB/2GB/4GB), Pi 3 and Pi Zero WH Models. Includes Components, Instructions and Code for Scratch and Python.
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•A complete electronics project kit for Raspberry Pi. Contains: Mini breadboard Breadboard cables x9, 5 volt buzzer, Push button switch, Light Sensor (light dependent resistor LDR), NPN transistor 2N3904, Capacitor 100uF, 3x LEDs - red, green & yellow, 3x 220 ohm resistors, 1x 1k resistor, 1x 2.2k resistor, 1x 3.3k resistor, 1x 10k resistor, and a GPIO pin out reference card
•Projects: 1. Flash an LED on & off. - 2. Get input from a push button switch. - 3. Use a push button switch to toggle an LED on and off. - 4. Traffic lights sequence with red, yellow and green LEDs. - 5. Turn the buzzer on and off using GPIO. - 6. Use the transistor as an electronic switch to turn the buzzer on and off (louder). - 7. Get a reading from the light sensor (LDR). - 8. Make a drawer/cupboard/room alarm using the light sensor, that emails your phone.
•You can also download the shell scripts used directly from our server to your Raspberry Pi (to save you having to type them in)
•An electronics project kit suitable for beginners, with full instructions and email support. Example code for Scratch, Python 3 gpiozero, and Shell scripts.
•Suitable for use with Raspberry Pi 4 (1GB/2GB/4GB), Pi 3 and Pi Zero WH models.