door hinges jig door hinge routing jigdoor hinge mortiser ki P | Shop The World
From USA
NewMaxanda
Door Hinges Jig, Door Hinge Routing Jig,Door Hinge Mortiser Kit Installation Template for Length 3” to 5” Radius 1/4” Or 5/8” Thickness Types Door Hinge
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•Door Hinges Jig For Cut Mortises in The Doors of Hinges From 3" To 5" in Length & 1/4" and 5/8" in Thickness.
•Door Hinges Jig Can Be Used To Cut and Install Door Hinges With Circular or Square Corner Hinges.You Can Use The Door Hinges Jig To Complete The Work Without The Need For a Hammer or Chisel, Which is a Simpler and More Effective Tool.(NOTE: Only Work On The Door, Not On The Frame.)
•The Advantages of The Door Hinges Jig Tool: 1. Adjustments Can Be Made Based On The Length, Thickness, Rounded Corners, and Right Angles of The Hinge
•2. The Built-in Depth Gauge on The Side is Used To Connect The Router Drill Bit And Set The Depth
•3. Equipped With Self Centering Hinge Drill Bits To Ensure Perfect Hinge Screws
•Door Hinges Jig Material Quality：Door Hinges Jig Made of Sturdy Plastic Material and Silicone Anti Slip Pads on Both Sides,Very Stable and Sturdy, Effective For Long-Term Use, and Will Not Damage Your Door When Installing The Door Hinge
•The Use of The Door Hinges Jig Tool Can Be Divided Into Three Steps: Determining The Shape of The Hinge, Cutting The Shape Of The Hinge, and Installing The Door Hinge:
•Method for Identifying and Determining Hinge Shape: 1: Identify The Shape of The Hinge and Use The Corner Guide For Hinges With a Corner Radius of Approximately 1/4 or 5/8 ". 2: Use Clips To Secure The Hinge Insert To The Door. 3: Eliminate The Length Guide and Adjust It To The Desired Length. 4: Mark The Established Edges.
•Method for Cutting Hinge Shape: 1: Remove The Router Drill Bit and Install It On The Router 2: Place It On The Router Drill Depth Gauge To Set The Depth and Lock It In Place 3: Turn On The Rrouter and Cut The Hinge Shape From The Template Area 4: Release The Door Hinge Template
•Installation Method For Door Hinges: 1: Use a Self Centering Hinge Drill Bit To Drill Holes For The Hinge 2: Use a Screwdriver Head To Install The Door Hinge Onto The Door
From USA
