DIYmalls 1.44" inch TFT LCD Display Screen Module 3.3V RGB 65K | Shop The World
From USA
NewDIYmalls
DIYmalls 1.44" inch TFT LCD Display Screen Module 3.3V RGB 65K 128x128 4-Wire SPI ST - 7735S for Arduino 2560 ESP32 Development Board (Pack of 2)
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•This 1.44 inch spi does NOT have touch.
•The 1.44" display is compatible with u no, mega-2560, C51(stc89c52rc, stc12c5a60s2), STM32(stm32f103rct6, stm32f103zet6, stm32f407zgt6, stm32f 429igt6).
•It's a 3.3 volt screen, so it will not work without resistors revised on a 5v device like an U NO.
•If you're using a 5v microcontroller then four 560 Ohm, 680 Ohm or 1k Ohm resistors are needed for the data lines SCK, SDA, AO, and CS, to pull the voltage down from Ar duino pins.
From USA
