BTF-LIGHTING FCOB COB 12mm 3Pin Connectors Kit WS2811 IC RGB 7 | Shop The World
From USA
NewBTF-LIGHTING
BTF-LIGHTING FCOB COB 12mm 3Pin Connectors Kit for WS2811 IC RGB 720LEDs/m COB LED Light,L-Shaped,Dual-End with Wire,Strip to 3Pin JST,Strip to Wire,Gapless Connector etc.
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•【Compatible Lights】Only support the SPI 3PIN 12mm(0.47in) width FCOB WS2811 IC RGB 720LEDs/m LED Strip and FCOB WS2814 IC RGBW 896LEDs/m LED Strip. NOT for 10mm/8mm/5mm LED Tape Lights.
•【Package content】3pcs L-shaped Left connector, 3pcs L-shaped Right connector, 3pcs Dual-End with Wire connector, 3pcs Strip to 3pin SM Female Plug connector, 2pcs Wire to Strip connector(Left), 2pcs Wire to Strip connector(Right), 4pcs Strip to Strip connector, 2pcs 3Pin 15cm Long 22AWG Extension Wires.
•【Multiple Uses】The L-shaped connector can easily solve the problem of corner connection! FCOB LED strip Splicing ,connect the controller directly. .No soldering required.Transparent, it won't block out LED strip light,imple operation.Tinny and low profile design.
•【Note】1.The connector is disposable. If you want to pull out the light strip, you must damage the connector. 2.Press the patch(Copper clips)to make sure it is fully clamped. Otherwise the LED Strip may flicker or fail to light up due to poor contact.
•【After-sale service】Please feel free to contact Customer Support If you encounter any problems during installation .We will do our Customer Service best! our products come with a 365-day warranty.
From USA
