Arducam 12.3MP IMX477 HQ Camera Module 6mm CS Lens Tipod Mount | Shop The World
From USA
NewArducam
Arducam 12.3MP IMX477 HQ Camera Module with 6mm CS Lens and Tipod Mount Compatible with Jetson Nano，Xavier NX and NVIDIA Orin NX/AGX Orin, and Raspberry Pi CM3/3+ and CM4
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•A Can't-Miss Update to IMX219 - Much better picture quality and lens flexibility, thanks to 53% more pixels, 92% larger pixel size, 192% larger imaging area, and a CS-Mount. Maximum still resolution at 4056 × 3040, frame rates: 30fps@Full 12.3MP, 60fps@1080P. Frame Rate (NVIDIA Orin NX/AGX NX): 4032x3040@60fps, 1920x1080@60fps
•Accelerated by Jetson Hardware ISP Engine - Support NVIDIA Argus Camera plugin for H264 encoding, JPEG snapshots, as well as gain, exposure, framerate, and group, hold control.
•Only a driver away from Plug-and-Play - Arducma for Pi HQ camera module requires hardware modification before installing the Jetson IMX477 driver, which could bring potential damage and void the warranty. Ours don’t.
•Less Hassle to Use - No more wasting time looking for the CS lens, a 1/2.3″ 6mm focal length CS lens is included; The tripod mount makes it mount on any 1/4"-20 standard mounting tripod easily; 29mm, 30mm, 34mm for optional hole pitches.
•NOTE - This camera compatible with Pi Compute Module (like CM3, CM3+, CM4), but is not compatible with standard Pi models (like Raspberry Pi 3/3B+/4). Tripod ASIN: B088H5R3N8
From USA
