Alfa Pasca Carbon Bike Seatpost 30.8 Bicycle Seat Post Bike Se | Shop The World
From USA
NewAlfa Pasca
Alfa Pasca Carbon Bike Seatpost 30.8 Bicycle Seat Post Bike Seat Tube for Mountain Road Bikes MTB BMX
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•1,bike seat post Material:T700 carbon fiber;Appearance:3K Matte; Weight:Approx 210+/-10g;Diameter:27.2/30.8/31.6mm;length:350/400mm;Offset:25mm.(As the frame seat is 27.2mm, need to buy less than 27.2 caliber seat post to install).
•2,We produced all the seat tube diameter will be less than the size of the label:Seatpost Diameter is 26.8 ~ 27.2mm Used in frame seatpost 27.2mm;Seatpost Diameter is 30.4 ~ 30.8mm Used in frame seatpost 30.8mm;Seatpost Diameter is 31.3 ~ 31.6mm Used in frame seatpost 31.6mm;Some customers to buy the frame seatpost diameter is not standard, resulting in the seatpost can not be installed, please be sure to check,The seatpost needs to be properly secured using the seatpost clamp.
•3,The saddle can be adjusted by adjusting the bicycle seatpost screws at the front and rear of the clamp seat to adjust the angle of the saddle in small increments. It can adapt to different needs on the road and adjust to a comfortable sitting position.Carbon Fiber seatpost compares to Aluminum Alloy seat post :Lighter in weight.Much more beautiful in appearance. Brighter in Color. Stronger in pressure resistance. Anti-Shock. Has proper elasticity, improving your bicycle' class in minutes.
•4,Install the MTB carbon seatpost correctly, please follow the specified tightening torque (4Nm),Tighten the screws. Since it is made of carbon, we recommend tightening the body to support it by tightening with your hands. Cracks can occur when strong tensions occur.Recommended for use with carbon fiber seatpost clamps.
•5,This road bike seat post is suitable for attachment to a saddle with a hole. If there is no hole in the saddle, we recommend using a hexagon wrench to tighten the screw.The clip seat part is made of high-strength aluminum alloy, one-piece molding, safe and durable; Structure of upper and lower clip parts, supportive bow cushion.Fit for bow size:6*6mm/7*7mm/7*9mm/7*10mm/8*10mm.
