ADINC EC5 Jump Starter Cable with Battery Clamps - 12V Replacement Alligator Clips to EC5 Car Jumper Cable for Emergency Portable Car Jump Start Battery Booster Cable 10AWG Wire

PAY ATTENTION PLEASE. This item has its limited, it can't be overload, hope you can be careful and check your devices specifications before using. Thank you! Specifications: Total length: about 36cm Support up to: 20000mAh Power bank at 600Amp Current (<3 seconds) Input: 12V Operating temperature: 0C-60C Wire Guage: 10 AWG - Strong Alligator Clamp Clip with EC5 Plug Connector (Fit for most car jump portable starters) Usage of Car Jump Starter: 1. Connect the red battery clamp of jumper cable to the vehicle's positive (+) battery and connect the black to the negative pole. 2. Plug the cord of jumper cable into the jumper starter's socket. 3. Start the vehicle. Cautions: 1. Do not reverse the operation sequence of the jump starter. 2. Do not use jump starter to start vehicle if the number of battery indicators are less than 3 to protect the jump starter from damage. 3. Do remove the product from the vehicle within 30 seconds after the vehicle started, or it may cause security incidents. Any questions and problems, please feel free to contact us , we will answer and solve it asap to meet your 100% satisfactory with best service.