9.68Ft Micro USB Dash Cam Hardwire Kit - 12V-30V 5V 2.5A Car D | Shop The World
From USA
NewSalior
9.68Ft Micro USB Dash Cam Hardwire Kit - 12V-30V to 5V 2.5A Car Dash Camera Charger Power Supply+4PCS 16AMG Car Fuse Tap&4PCS 5A Blade Fuse for Most Car Dash Camera (Micro USB)
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•【365 days monitoring of the dashboard】: The ideal solution for dashboard cameras that are not limited to vehicle start-up only and do not occupy the cigarette lighter. 12/24V to 5V dashboard battery packs provide a long-term stable power supply from the car battery to the dashboard, keeping it under 24/7 monitoring and giving you plenty of security.
•【What to expect】: To make this 2.95M long hardwire kit suitable for most automotive applications on the market,the kit also includes 4 popular fuse taps,4 popular 5A blade fuses and 1 mounting pry bar to select the right accessories for your dash cam, no wire breaking installation and no expertise required to complete.
•【Wide Compatibility】: The 12-30V hardwire kit will allow the camera to connect directly to a 12-30V car, truck, bus, SUV or large truck. Compatible with all usb c dash cams, GPS navigators, radar detectors, etc. Examples include N4, N2 Pro (2023) and E1, E1 Lite, E2, E3, S2-2CH, S2-3CH, N2S, X4S, N1 Pro (2023), T3 dash cams.
•【Low voltage auto power off】: The upgraded dash cam hardwire is made of flame retardant PC shell + built-in dual intelligent voltage reduction chips, real-time monitoring of the battery voltage situation, if the voltage or power supply is found to be too low, it will automatically cut off the power to protect the battery, reduce power waste, and retain enough power to start the engine.
•【Concealed installation】: the dash cam hardwire kit is installed in a completely concealed and non-destructive way. Turn off your car, connect the connector to the device, and open the car fuse box cover. Plug the positive red wire around the fuse pin, connect the black wire to the override, and use the warp plate to hide the harness along the edge into the gap.
From USA
