4PCS POE Over Coax Converter BNC Ethernet IP Extender EOC, 328 | Shop The World
From USA
NewCubQuantnestars
4PCS POE Over Coax Converter BNC to Ethernet IP Extender EOC, 3280ft(1000m) Power & Data via RG59 Coax Cable, Analog to IP CCTV System Upgrade Adapter, Dual Interface BNC+Twisted Pair, Plug & Play
ℹ
Products from the USA may come with an input voltage of 110V–120V, requiring a step-down transformer. Check the device wattage to select the correct power converter.
•【POE Dual-Standard & DC+LAN Interface Instructions】 4-Pack EoC Receiver has DC48V/12V Plug (no extra power if using POE) + 4-Pack Lan(IN)Port Connect to Standard POE Switch/Standard POE injector;★ EoC Transmitter has DC12V Plug (no extra power if using POE) + Lan(OUT) Port connects to POE Power-Using Equipment/non-POE devices (IP cameras, VoIP phones, WiFi APs).
•【Built-in BNC & Twisted Pair Dual Functions】Integrated Dual-Medium POE Transmission no extra BNC-to-twist-pair adapters needed, for stable, high-efficiency use. Enables POE power + data transmission over coaxial (BNC-F interface) and twisted pair, ideal for elevator cart CCTV systems or industrial sites—solves POE device connectivity where rewiring is impractical.
•【Analog to IP Upgrade Widely Used】Reuse existing RG59/RG6/RG11 coaxial cables to upgrade analog surveillance systems to IP networks, eliminating the cost and hassle of rewiring. The Lan RJ-45 port supports 568A/568B wiring standards and is compatible with IEEE802.3af (PoE) & 802.3at (PoE+) protocols. Ideal for multiple scenarios including security video systems, home automation, access control, multimedia systems, education systems and information diffusion systems. Each set includes 1 Transmitter + 1 Receiver (please read the manual before use).
•【Plug-and-Play】Industrial-Grade Reliability POE Setup Features industrial-grade reliability with a built-in heat sink, ensuring uninterrupted POE transmission even during long-term use. With a compact and lightweight design (4.33"x2.17"x0.98"), it’s easy to install and place. No complicated configuration required—simply connect the receiver to a POE switch via the Lan (IN) port, and the transmitter to POE cameras via the Lan (OUT) port. (Pre-paired for indoor use only; do not mix with other devices.)
•【Long-Distance Stable POE & Signal Delivery Over coax】Supports stable long-distance transmission: 100Mbps (300m/1000ft) / 30Mbps (2000m/6560ft) over coaxial cable, and 75Mbps (300m) / 25Mbps (2000m) over twisted pair. Compatible with CCA/CCU cables, it synchronously transmits video, audio, data, control signals and POE power to meet remote monitoring needs. (Note: The speed rate refers to a single pair; more connected devices will result in lower speed.)
From USA
